Wednesday, December 24, 2008

TRIUMPH MOTORCYCLE NEW DAYTONA 675


Since launching as the first three cylinder bike into the highly competitive supersports bike category, the Daytona 675 has made a lasting impression.

The combination of the lightest frame in class and narrow three cylinder engine has always given the handling, agility and intuitive feel that sets the Daytona apart.

The 2009 Daytona improves on this still further with new fully adjustable front and rear suspension, both of which allow the rider to adjust high and low speed compression damping separately.

There’s further evidence of our ongoing performance focus with increased power output, now up 3PS to 128PS peak, plus a 3kg reduction in overall weight. The rear wheel has been reworked to reduce weight and inertia for quicker acceleration and improved suspension performance.

Add to this new front monobloc radial callipers and radial master cylinder that deliver track bred stopping power. For 2009 the engine management system has been calibrated to accept our new accessory quick-shifter. No mess, no fuss just bolt it on and plug it in. All this clearly shows how on track development time has significantly contributed to the new Daytona 675.

As top supersport in the demanding Masterbike in ‘06 and ‘07 and the Supertest ‘King of the Supersport’ crown for three years running, the Daytona has already proven to be an unbeatable combination of inspiration and engineering on road and track.

The new 2009 Daytona 675 raises the bar once again.

Engine
Type
Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder

Capacity
675cc
Bore/Stroke
74.0 x 52.3mm
Compression Ratio

Fuel System
Multipoint sequential electronic fuel injection with forced air induction
Transmission
Final Drive
O ring chain

Clutch
Wet, multi-plate
Gearbox
6-speed, close ratio
Cycle Parts

Frame
Aluminium beam twin spar
Swingarm
Braced, twin-sided, aluminium alloy with adjustable pivot position
Front Wheel
Cast aluminium alloy 5-spoke, 17 x 3.5in
Rear Wheel
Cast aluminium alloy 5-spoke, 17 x 5.5in
Front Tyre
120/70 ZR 17
Rear Tyre
180/55 ZR 17

Front Suspension
41mm upside down forks with adjustable preload, rebound and high/low speed compression damping, 120mm travel
Rear Suspension
Monoshock with piggy back reservoir adjustable for preload, rebound and high/low speed comporession damping, 130mm rear wheel travel
Front Brakes
Twin 308mm floating discs, Nissin 4 piston radial monobloc calipers
Rear Brakes
Single 220mm disc, Nissin single piston caliper

Dimensions

Length
2,010mm (79.1in)
Width (Handlebars)
700mm (27.5in)
Height
1,120mm (44.0in)
Seat Height
825mm (32.5in)
Wheelbase
1,395mm (54.9in)
Rake/Trail
23.9º/89.1mm
Dry Weight
162kg (356lbs)
Fuel Tank Capacity
17.4 litres (3.8 gal)
Performance (Measured at crankshaft to DIN 70020)

Maximum Power
128PS / 126bhp / 94kW @ 12,600rpm
Maximum Torque
73Nm / 53ft.lbf @ 11,750 rpm

Colours
Jet Black, Tornado Red

Wednesday, December 17, 2008

KTM MOTORCYCLE 1198 RC8R


The superbike world keeps getting bigger, as European marques move in on the Japanese market. KTM, Europe’s second-largest manufacturer, has literally made its superbike bigger with the release of a higher-spec version of the RC8 at the EICMA 2008 Milan Bike Show.

The new RC8R, the second version of KTM’s inaugural superbike, ramps up the performance factor with a larger engine. Increasing the bore from 103 to 105mm (same 69mm stroke) bumped up displacement for the 75-degree V-Twin from 1148 to 1195cc. The compression ratio also spiked, jumping from 12.5:1 to 13.5:1.

The liquid-cooled Twin uses the extra room to produce a claimed 165 horsepower in stock trim. Torque production is 90.7 lb-ft. (The regular RC8 only powers up to 155 hp and 88 lb-ft, according to KTM PR claims.) For the real power junkies, and racers, a sport kit brings the RC8R peak ponies up to 180 – a claim which evens up the new R with its Italian rival, the Ducati 1098R.

WP suspension components, a 43mm fork and monoshock, headline a near identical chassis spec sheet to its non-R sibling. Changes include a 5mm increase in trail (97mm – 3.82 in) and 5mm decrease in wheelbase (1425mm – 56.1 in). Another difference is the claimed weight (without fuel), with the R crossing the scales at a claimed 401.2 lbs (182 kg), 4.4 lbs lighter. In sport kit trim, the R would almost match the 1 to 1 metric power-to-weight ratio of the 1198cc Ducati Twin superbike.

No official word yet on when or if the new RC8R will turn competitive laps in the World Superbike championship. But with BMW and Aprilia all tossing their hats in the SBK ring, alongside with the dominance of Ducati, it’s not too big a stretch to imagine a European quartet vying against the Big Four from Japan. Stay tuned.

Specs
Engine: 75-degree V-Twin
Displacement: 1195 cc
Bore x stroke: 105 x 69 mm
Cooling: Liquid
Horsepower: 165 hp @ 10250 rpm
Torque: 90.7 lb-ft @ 8000 rpm
Compression ratio: 13.5:1
Transmission: 6 gears
Fueling: Keihin EFI (throttle body 52 mm (2.05"))
Clutch: Wet multi-disc hydraulic clutch
Frame: Chromium-Molybdenum trellis frame
Front suspension: WP 43mm USD Fork, 4.7-in travel
Rear suspension: WP-Monoshock, 4.7-in travel
Front brake: Radial-mount Brembo four-piston caliper, dual 320mm discs
Rear brake: Brembo two-piston, 220mm disc
Wheels: Cast Aluminum 3.5 x 17"; 6 x 17"
Tires: 120/70 ZR 17; 190/55 ZR 17
Trail: 97 mm (3.82 in)
Wheelbase: 1425 mm (56.1 in)
Seat height: 31.69/32.48 in
Fuel Tank: 4.36 gal 0.92 reserve
Weight: 401.2 lbs (182 kg)

Tuesday, December 16, 2008

APRILIA MOTORCYCLE SRV4


A revolutionary design project has led to a truly unique motorcycle and Aprilia's return to the Superbike World Championship.

With 31 World Championship titles, 250 MotoGP wins and 8 Superbike victories in the last sixteen years, Aprilia is a legend in modern motorcycling. Aprilia motorcycles have dominated circuits all over the world thanks to unconventional technical solutions, experimentation and innovation and, sometimes, by revolutionising technology thought to be unchangeable.

With this unique sporting heritage behind them, Aprilia is proud to present the RSV4, the bike with which Aprilia will return to the Superbike World Championship in 2009. This extraordinary machine has been conceived, designed and developed entirely by Aprilia Racing for competition use.

The RSV4 will make its debut in the 2009 Superbike World Championship. With four cylinders, 999cc and top of the class power in the race-ready version, this revolutionary machine is packed with innovative design and manufacturing solutions of the sort we have come to expect from Aprilia. A V-Four engine with total electronic management, and an exceptionally light and compact chassis are just some of the features that make this bike unique in the world of motorcycling. The revolutionary design of the Aprilia RSV4 comes directly from Europe's biggest and most successful racing team.

This is the bike that Max Biaggi will campaign next year in World Superbike.

The road-going version of the RSV4 also benefits from the extraordinary technical know-how that Aprilia Racing has accumulated over two decades of success in MotoGP, and is packed with advanced solutions from GP racing. In short, the RSV4 stands alone as a exclusive, genuine, and in many ways unique racing replica.

The Aprilia RSV4 is powered by the most revolutionary and most powerful engine ever developed by Aprilia. This 65-degree V-Four unit is based on an architecture that is unique in the world of supersport motorcycles, and features refined engineering combined with prestigious materials and advanced electronic management solutions.

The new engine uses multi-mapping ride-by-wire technology, a solution that opens up new horizons in engine control, and offers virtually infinite opportunities for power delivery and traction control (present as standard on the racing version).


The 2009 Aprilia RSV4 has all the right componentry for it to be a serious contender on the racetrack.
The choice of a narrow V-layout has led to the development of an incredibly narrow engine. This in turn has permitted weight to be centralised and chassis performance dramatically improved (thanks to a short wheelbase and long swingarm). The narrow V-Four configuration permits a longer stroke to be used, with clear benefits in terms of improved engine breathing. High engine speeds can therefore be reached without having to extend the width of the crankcase. This is fundamentally important to aerodynamics and maneuverability (two characteristics for which Aprilia motorcycles have always been universally acclaimed).

The monobloc cylinder block features integrated liners for maximum rigidity and consistent efficiency. The air intake trumpets are variable in length. Each bank of cylinders has a servomotor dedicated exclusively to the operation of their two throttle bodies. The aperture of the four butterfly valves, and therefore the volume of air inducted, can therefore be controlled independently. This solution opens up new horizons in electronic engine and power management, resulting in truly advanced integral traction control. A cassette type gearbox and a slipper clutch demonstrate the racing character of this engine.

The Aprilia RSV4 has been designed and developed with competition in mind, and naturally offers all the adjustments normally found on racing machines. In particular, this most powerful Aprilia ever made stands out for its complete range of chassis adjustments. The variable geometry frame not only allows you to change parameters like headstock angle (thanks to interchangeable steering bushings), but even lets you adjust swingarm and engine position. Racing technology has been used for all aspects of construction. The RSV4's aluminium frame and swingarm are constructed from a clever mix of thick-walled parts and variable section sheet.

Ohlins suspension on both ends, Brembo Monoblocs, a V-Four motor! I'll take two please!

All components are naturally of the highest caliber. They include an Ohlins fork, rear monoshock and steering damper, Brembo monobloc brake calipers and forged aluminium wheels.

The styling of the Aprilia RSV4 has followed the same approach as the rest of the design. The RSV4's racing character is clear from every component, and from the absence of solutions chosen only for appearances. As a result the overall design of the RSV4 and the advanced technology of its component parts merge into a uniquely harmonious whole that is superbly functional on the racetrack - the natural habitat of this latest Aprilia.

The fairing has been developed in the wind tunnel. Minimal in size, it in no way detracts from the stunning technology of the engine. The frame/engine system is fully visible and bulges like muscles beyond the fairing.

The triple headlight cluster makes the RSV4 instantly recognisable and unique from the very first glance.

The superbly lightweight tail slopes upwards to emphasise the dynamic nature of the Aprilia RSV4. Even when stationary, the bike simply exudes a desire for speed and competition.

Thursday, December 4, 2008

APRILIA MOTORCYCLE SCARABEO 200


The result of brilliant intuition by Aprilia, Scarabeo has withstood the test of time by adapting to change and incorporating the latest technology. Over the years Scarabeo has grown in engine size, with new models introduced to satisfy diverging needs. Deep down, however, Scarabeo remains faithful to the original concept behind its amazing success. In brief, Scarabeo remains a trend-setter.

Scarabeo 200

Engine
Single cylinder four stroke, forced liquid cooling with centrifugal pump, four valve DOHC (double overhead cam) cylinder head.

Fuel
Lead free petrol.

Bore and stroke
63 x 58 mm

Displacement
180.8 cc

Compression ratio
12:1

Max. power
19 HP at 8250 rpm

Max. Torque
17 Nm at 7500 rpm

Fuel system
Keihin carburettor, Ø29 mm.

Ignition
CDI electronic with automatic advance and retard.

Starting
Electric starter.

Lubrication
Wet sump, forced circulation with mechanical pump.

Gearbox
Automatic variator.

Clutch
Automatic centrifugal.

Primary drive
V belt.

Final drive
Gearbox.

Frame
Open cradle frame in high strength steel.

Front suspension
35 mm hydraulic fork.

Rear suspension
Engine acting as swingarm; two hydraulic shock absorbers with adjustable spring preload.

Brakes
Front: Ø 260 mm stainless steel disc with floating three-piston caliper. Integral braking system.
Rear: Ø 220 mm stainless steel disc with two-piston caliper. Integral braking system.

Wheels
Light alloy, six spoke.
Front: 2.5 x 16"
Rear: 3 x 16"

Tyres
Tubeless.
Front: 110/80 x 16"
Rear: 120/80 x 16"

Dimensions
Overall length 80.31 in.
Overall width 28.34 in.
Wheelbase 54.76 in.
Seat height 31.88 in.

Fuel tank
Capacity 2.11 gal (including reserve of .52 gals.)

Colour schemes
Lead grey, Shine red

Wednesday, December 3, 2008

APRILIA MOTORCYCLE SCARABEO 100 4T


Ever since its arrival back in 1993, Aprilia’s Scarabeo has set the pace for scooter design and technology, becoming a style icon in its own right. Every large wheel scooter produced since then has tried to copy Scarabeo's design. Because still today Scarabeo represents the most successful mix of classical and modern lines in any scooter.

Scarabeo’s reassuring, essential looks never go out of fashion. And with its flat platform, and modern, reliable engines, Scarabeo is amazingly easy to ride too. In fact, Scarabeo’s recipe for success is so beautifully simple that it is impossible to copy. That is why riders become so attached to their Scarabeos that they would never change to another scooter. That too is why Aprilia takes such great care whenever it makes ...

Technical specifications


Engine
Horizontal single cylinder four stroke. Forced air cooling. Secondary air catalytic converter.

Cooling
Forced air cooling.

Fuel
Unleaded fuel.

Bore
50 mm

Stroke
49 mm

Displacement
96.2 cc

Compression ratio
10.5:1

Starting
Electric and kick-start.

Generator
Permanent magnet flywheel 12 V – 120 W.

Gearbox
Air cooled, automatic variator.

Primary drive
V belt.

Final drive
Gearbox.

Clutch
Centrifugal.

Frame
Twin member single spar frame with double cradle in high strength steel.

Front suspension
Hydraulic fork. Wheel travel 80 mm.

Rear suspension
Hydraulic monoshock. Wheel travel 82 mm.

Brakes
Front: 220 mm stainless steel disc. Caliper with two opposed 30 mm pistons.
Rear: 140 mm drum, single leading shoe.

Wheels
Light alloy, five spokes.
Front 1.60 x 16".
Rear 1.85 x 16”.

Tyres
Front : 2.5 x 16" 42J.
Rear : 2.75 x 16" 46J.

Dimensions
Overall length: 1905 mm
Overall width: 705 mm
Overall height: 1270 mm
Seat height: 780 mm
Wheelbase: 1256 mm

Weight
88 kg

Tank capacity
8 litres (1 litre reserve)

Accessories
Complete large windshield, leg cover, LH mirror, interchangeable leg shield inserts (graphics: Italy / UK / Tiger / Zebra / Mimetic / Sky).

Tuesday, December 2, 2008

APRILIA MOTORCYCLE SCARABEO 500 I.E.


Aprilia was the first to believe that the lightweight motorcycle was destined to return in the form an easy and fun to ride, automatic, spacious and comfortable large wheel scooter – the Scarabeo. Over the years Scarabeo has become a genuine style icon with its classic-modern design.

UTILITY DESIGN
One glance is all you need to pick out a Scarabeo i.e. from a thousand other bikes. Scarabeo i.e. is unique, a perfect mix of classic styling and modern finish that inevitably sets the pace. But like every other member of the family, Scarabeo i.e. with its unmistakable, classical lines is not just a pretty face! Its sleek lines hide advanced ergonomics and functionality, and incorporate a wide range of solutions to make life in the saddle easier and more ...

APRILIA SCARABEO 500 I.E. TECHNICAL SPECIFICATIONS


Engine
Liquid cooled single cylinder four stroke.
Single overhead cam (SOHC), 4 valves.

Fuel
Unleaded petrol.

Bore and stroke
92 x 69 mm.

Displacement
460 cc

Compression ratio
10.5:1.

Maximum power
29 kW (39 HP) at 7,500 rpm

Maximum torque
43 Nm at 5,500 rpm

Fuel system
Electronic fuel injection.

Ignition
Electronic CDI ignition with automatic timing.

Starting
Electric.

Alternator
12 V – 380 W.

Lubrication
Wet sump. Forced circulation with mechanical pump.

Gearbox
Automatic variator.

Clutch
Automatic centrifugal dry clutch.

Primary drive
V belt.

Final drive
Gearbox.

Frame
High strength tubular steel frame with closed double cradle.

Front suspension
40 mm hydraulic fork. Wheel travel 103 mm.

Rear suspension
Engine acting as swingarm. Two double acting shock absorbers
with 4 spring preload settings. Wheel travel 100 mm.

Brakes
Front: Twin 260 mm stainless steel discs. Floating calipers with two parallel pistons. Integral braking system.
Rear: 240 mm stainless steel disc. Fixed caliper with two pistons. Integral braking system.

Wheels
Light alloy.
Front: 3.00 x 16”;
Rear: 4.50 x 14”.

Tyres
Tubeless.
Front 110/70 x 16”;
Rear: 150/70 x 14”.

Dimensions
Overall length: 2,263 mm
Overall width: 765 mm (at handlebars)
Overall height: 1,411 mm (at windshield)
Wheelbase: 1,535 mm
Seat height: 780 mm

Dry weight
189 kg

Tank capacity
13.2 litres (3 litres reserve)

Standard equipment
Car-type electronic anti-theft system with remote control.

Optional accessories
Large windshield with hand-guards, 50 litre tunnel bag, 47 litre
Street Case top box in matching paint finish, 35 litre City top box in matching paint finish personalised for Scarabeo, optional top box backrests.