TRIUMPH MOTORCYCLE NEW DAYTONA 675

Since launching as the first three cylinder bike into the highly competitive supersports bike category, the Daytona 675 has made a lasting impression.

The combination of the lightest frame in class and narrow three cylinder engine has always given the handling, agility and intuitive feel that sets the Daytona apart.

The 2009 Daytona improves on this still further with new fully adjustable front and rear suspension, both of which allow the rider to adjust high and low speed compression damping separately.

There’s further evidence of our ongoing performance focus with increased power output, now up 3PS to 128PS peak, plus a 3kg reduction in overall weight. The rear wheel has been reworked to reduce weight and inertia for quicker acceleration and improved suspension performance.

Add to this new front monobloc radial callipers and radial master cylinder that deliver track bred stopping power. For 2009 the engine management system has been calibrated to accept our new accessory quick-shifter. No mess, no fuss just bolt it on and plug it in. All this clearly shows how on track development time has significantly contributed to the new Daytona 675.

As top supersport in the demanding Masterbike in ‘06 and ‘07 and the Supertest ‘King of the Supersport’ crown for three years running, the Daytona has already proven to be an unbeatable combination of inspiration and engineering on road and track.

The new 2009 Daytona 675 raises the bar once again.

Engine
Type
Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder

Capacity
675cc
Bore/Stroke
74.0 x 52.3mm
Compression Ratio

Fuel System
Multipoint sequential electronic fuel injection with forced air induction
Transmission
Final Drive
O ring chain

Clutch
Wet, multi-plate
Gearbox
6-speed, close ratio
Cycle Parts

Frame
Aluminium beam twin spar
Swingarm
Braced, twin-sided, aluminium alloy with adjustable pivot position
Front Wheel
Cast aluminium alloy 5-spoke, 17 x 3.5in
Rear Wheel
Cast aluminium alloy 5-spoke, 17 x 5.5in
Front Tyre
120/70 ZR 17
Rear Tyre
180/55 ZR 17

Front Suspension
41mm upside down forks with adjustable preload, rebound and high/low speed compression damping, 120mm travel
Rear Suspension
Monoshock with piggy back reservoir adjustable for preload, rebound and high/low speed comporession damping, 130mm rear wheel travel
Front Brakes
Twin 308mm floating discs, Nissin 4 piston radial monobloc calipers
Rear Brakes
Single 220mm disc, Nissin single piston caliper

Dimensions

Length
2,010mm (79.1in)
Width (Handlebars)
700mm (27.5in)
Height
1,120mm (44.0in)
Seat Height
825mm (32.5in)
Wheelbase
1,395mm (54.9in)
Rake/Trail
23.9º/89.1mm
Dry Weight
162kg (356lbs)
Fuel Tank Capacity
17.4 litres (3.8 gal)
Performance (Measured at crankshaft to DIN 70020)

Maximum Power
128PS / 126bhp / 94kW @ 12,600rpm
Maximum Torque
73Nm / 53ft.lbf @ 11,750 rpm

Colours
Jet Black, Tornado Red